Shenyang / Chengdu "6th Gen" Aircraft - News and Analysis

[njiiaf]

I don't think CG art is worth scrutinizing?

I thought it was a real photo

 

[Bounce]

I thought it was a real photo

No it's fan art.

六代机高清大图_哔哩哔哩_bilibili

-, 视频播放量 88568、弹幕量 51、点赞数 2604、投硬币枚数 32、收藏人数 325、转发人数 134, 视频作者 高冉减, 作者简介 ，相关视频：迄今为止，最清晰的六代机视频，熊猫！ 六代机第三次试飞，J-36降落的机背清晰画面·上进气口高清可见，太震撼了，身披割裂迷彩试飞中的歼36，成飞歼36新试飞降落（侧，机背视角），六代机试飞从大哥头顶飞过激动爆粗口，歼-36第三次透露最新细节，近距离感受六代机的发动机轰鸣声，极度震撼，歼20s最新图片，疑似换装矩型喷口，全宇宙首发F-47假想图，谁家还没有六代机？

www.bilibili.com

 

[njiiaf]

Interesting. From the snippet that was posted it looked like a real photo zoomed in.

 

[SUPER=BUG]

Is there a link to this video?

Sorry, it was removed.

 

[Deino]

View attachment 764629
Sorry, it was removed.

Found another source:

微博

随时随地发现新鲜事！微博带你欣赏世界上每一个精彩瞬间，了解每一个幕后故事。分享你想表达的，让全世界都能听到你的心声！

m.weibo.cn

 

[Elysium]

See Img below:

View attachment 764503

And imagine those diagonal ailerons as vanes.

Interesting idea, however if I understand correctly, in you scheme the control surface seems to be in the middle of the plane, and no such device is visible on the J-36. What seens to be going on imo, is they redirect the leading edgewise airflow/vortices to the side by opening those angled splitter plates
.

 

[TomcatViP]

I have never written what you intend me to say here. You are misunderstanding me.

 

[Elysium]

I have never written what you intend me to say here. You are misunderstanding me.

On the diagram you showed, the control surface is labeled VBL (if I read it correctly), which modifies how the vortex develops over the aft section of the wing.

Apologies if I misread what you meant, but in that case, can you explain how the scheme you mentioned works?

 

[Deino]

Via GyrfalconFC31/SDF:

"New video from bilibili shows J-36's splinter camo."

这是“银杏叶”第三次公开飞行？第六代战机真被我拍到了吗？我发布的第一条视频太有意义_哔哩哔哩_bilibili

第六代战机再次飞越成都上空, 视频播放量 969、弹幕量 0、点赞数 51、投硬币枚数 1、收藏人数 14、转发人数 0, 视频作者 少年爸萌娃爹, 作者简介 直男、老父亲、内拉祖里、传统媒体人、斯诺克爱好者，相关视频：更多视频曝出！歼36单机试飞 “原地快速掉头”...

www.bilibili.com

 

[TomcatViP]

On the diagram you showed, the control surface is labeled VBL (if I read it correctly), which modifies how the vortex develops over the aft section of the wing.
View attachment 764643
Apologies if I misread what you meant, but in that case, can you explain how the scheme you mentioned works?

See those pictures as illustrations only for the vortex path. They are not exactly related to our discussion but part of the research literature on Delta wings.
Here VBL stands for Vortex Breakdown

https://www.researchgate.net/figure/Comparison-of-vortex-core-and-occurrence-of-vortex-breakdown-VBL-on-water-tunnel_fig6_329638116

 

[Kommoe]

Interesting. From the snippet that was posted it looked like a real photo zoomed in.

Obviously it's a CG cause the real aircraft‘s main landing gears have a small tilt angle rather than para with the fuselage

 

[Manuducati]

Found another source:

微博

随时随地发现新鲜事！微博带你欣赏世界上每一个精彩瞬间，了解每一个幕后故事。分享你想表达的，让全世界都能听到你的心声！

m.weibo.cn

It would be interesting if some program could stabilize the image so the movements of the controle surfaces could be analyzed.

 

[Deino]

As it seems the so far clearest image of the J-36’s rear section to date?

Via @OedoSoldier

 

[tacitblue1973]

The outer yaw surfaces are nicely tucked in for a moderate speed test point.

 

[SspewixzzZ]

Did anyone post this? Though I am not sure if it is CGI... This shows it has leading edge flaps

Via bilibili@大千视界呀 https://www.bilibili.com/video/BV1GNZGY3EWF/

 

[snne]

Did anyone post this? Though I am not sure if it is CGI... This shows it has leading edge flaps

Via bilibili@大千视界呀 https://www.bilibili.com/video/BV1GNZGY3EWF/

CG

 

[jeffb]

Noice 3d model...

https://twitter.com/x/status/1906650771770523765

View: https://x.com/OedoSoldier/status/1906650771770523765

 

[pedrospe]

Noice 3d model...

https://twitter.com/x/status/1906650771770523765

View: https://x.com/OedoSoldier/status/1906650771770523765

Nice work

 

[EmoBirb]

Via GyrfalconFC31/SDF:

"New video from bilibili shows J-36's splinter camo."

这是“银杏叶”第三次公开飞行？第六代战机真被我拍到了吗？我发布的第一条视频太有意义_哔哩哔哩_bilibili

第六代战机再次飞越成都上空, 视频播放量 969、弹幕量 0、点赞数 51、投硬币枚数 1、收藏人数 14、转发人数 0, 视频作者 少年爸萌娃爹, 作者简介 直男、老父亲、内拉祖里、传统媒体人、斯诺克爱好者，相关视频：更多视频曝出！歼36单机试飞 “原地快速掉头”...

www.bilibili.com

View attachment 764649

Close enough.

Welcome back T-50-1/902 Black.

 

[alberchico]

Have no idea how accurate this is, but it's a really well made video

https://twitter.com/x/status/1907256689155522656

View: https://x.com/louischeung_hk/status/1907256689155522656

 

[snne]

Have no idea how accurate this is, but it's a really well made video

https://twitter.com/x/status/1907256689155522656

View: https://x.com/louischeung_hk/status/1907256689155522656

I'd normally call Louis a retard, but that'd be an insult to individuals with cognitive disabilities...

When it comes to PLA-watching, he's done as much disinformation and damage to it as the entire TWZ comments section...

(Hence, pls do not share his posts)

 

[Blitzo]

I'd normally call Louis a retard, but that'd be an insult to individuals with cognitive disabilities...

When it comes to PLA-watching, he's done as much disinformation and damage to it as the entire TWZ comments section...

(Hence, pls do not share his posts)

Louis is an idiot, that said the video itself is fan made/non-official and as a work of enthusiast CGI that is openly flagged as such, it's a decent quality piece of output (Gaoshan CG is the creator).

There are some details of the aircraft which are a bit off, for example the dorsal air intake doesn't have as pronounced of a notch as the real thing, and the engine nozzle/troughs here all seem to be "joined together" whereas in the real thing they seem to have minor recessed gaps on the dorsal side ala YF-23.