Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
A direct bottom view can only be aligned with a direct bottom photo, which unfortunately does not exist. However, I tried to match the 3D-view as close as possible to the original photo. Here is the result...Please note: I deliberately opted to add a 250mm wide gap to account for the door hinges/drive. Furthermore, this gap simply aligned well with the boundary layer diverter of the intakes As can be seen in the photo, this does not correspond to the actual implementation!However, the width of both bays does not seem to be far off from reality. It is rather the length of both bays that is indeed too much. But this can be easily adjusted.There is of course a lot of other inaccuracies as well - It's not easy to create a CAD-model without dimension available, just based on a few blurry pictures and guesstimations. That's why I always mark these images as notional
A direct bottom view can only be aligned with a direct bottom photo, which unfortunately does not exist. However, I tried to match the 3D-view as close as possible to the original photo. Here is the result...
Please note: I deliberately opted to add a 250mm wide gap to account for the door hinges/drive. Furthermore, this gap simply aligned well with the boundary layer diverter of the intakes As can be seen in the photo, this does not correspond to the actual implementation!
However, the width of both bays does not seem to be far off from reality. It is rather the length of both bays that is indeed too much. But this can be easily adjusted.
There is of course a lot of other inaccuracies as well - It's not easy to create a CAD-model without dimension available, just based on a few blurry pictures and guesstimations. That's why I always mark these images as notional
