Fredrik Granholm's incredibly detailed AIP submarine concept

covert_shores

Research + illustration
Senior Member
Joined
31 October 2014
Messages
717
Reaction score
318
Website
www.hisutton.com
I've been working with retired Swedish submarine officer Fredrik Granholm to publish an article on his 'Porpoise' 1000 ton submarine concept. He's a former officer on HMS Gotland and other boats, a semi-official Swedish Navy submarine historian, engineer and skilled draftsman.So his boat's design is incredibly detailed and well thought through. 3000+ word write up at http://www.hisutton.com/Porpoise_1000.html

Any feedback I can share with him would be very cool. :)

Teasers:
ylZQufb.jpg


gA9eAkV.jpg


qlS1GUN.jpg
 
Teaser image didn't save for me at first but try this method:
Click on image, then long press on image but instead of choosing save image choose view image, it will take you to teaser image's orignal site and then you can long press and save image.
 
(1) two torpedo tubes is awfully few for a sub of this size, regardless of that huge extra tube. This is particularly true if one is occupied by a set of 4 IDAS
(2) flat front and rear walls - is this a thing with submarines? I thought they would need to be near-hemispherical
(3) I don't quite see why the hatches need to be pressurised to the outer skin.
(4) no source of powering the rotation of the fore hydroplanes
(5) tethered floating antennas/sensors seem absent
(6) left and right computer workstation appear to require gymnastics
(7) why would one store the heavy torpedoes above the lightweight command centre? Seems like a poor idea from a roll stability point of view
 
Thanks for your feedback. I am not the designer but quick answers.

1. 4 tubes plus the FPL which can take a liner for another 4. Some could be loaded with tandem 400mm torpedoes.

2. Flat isn't that unusual these days. Strongly built etc.

3. Outer hull (casing) isn't pressurized, it's mostly free-flooding

4. Just not visible for to location of cross-section

5. See buoyant antenna. Wrote up briefly discusses sensors.

6. ???

7. Torpedoes are close to neutrally buoyant. Location is optimized for diver ops from FPL. Divers can use pure-Oxygen rebreathers more safely if they are less than 7m from surface.
 
Look at the computer workstations. Two of them cannot be reached without climbing over seats.

The outer hull is not pressurised on many sub designs, but the hatches clearly have pressurised cylindrical access to the pressurised inner hull.
This seems wasteful in terms of weight, cost and adds unnecessary potential points of failure.
 
Nice, can definitely see a lot of Kockums in there, many of those features have been in service with Sweden and Aust for a couple of decades, while features such as the large centre tube/lockout chamber have been around as concepts at least since the 2000s when I first saw them in tech briefings when I worked in submarine sustainment.
 
lastdingo said:
Look at the computer workstations. Two of them cannot be reached without climbing over seats.

The outer hull is not pressurised on many sub designs, but the hatches clearly have pressurised cylindrical access to the pressurised inner hull.
This seems wasteful in terms of weight, cost and adds unnecessary potential points of failure.
do you mean the access hatches going up to the deck? That's how you get in and out. There is one for each watertight compartment in case the center hatches are closed like in an emergency. The third hatch is through the escape capsule. And there is is a forth access portal over the engineering space but I think that's just got maintenance access. Normally it's sealed.

Maybe the seats swivel ;)

Ps. I don't think the outer hull (called a casing in this example) is pressurized on *any* sub designs except some sections of ballast (/regulation?) tanks.
 
The first series of images is of too poor a quality to be of any real use at this end. Do you have the abilioty to post the originals for download? It would be easier to make some kind of sense of them then.
 
Sorry, I really have to check properly. Do you have any further information views of the Type XXIX H?
 

Similar threads

Please donate to support the forum.

Back
Top Bottom