Bell X-22A ducted-propellor VTOL

hesham

hesham

ACCESS: USAP
Senior Member
Joined
26 May 2006
Messages
33,635
Reaction score
13,790
Hi,

we know Bell D-190 was air-sea-rescue vehicle also can
carry nine passenger,D-2005 was a ducted propeller VTOL
project and general similar D-2022 which was an Army version;

did the Bell D-2004,D-2020 and D-2021 relate to them or not?.
 
According to Jay Miller's X-Planes, those were all precursors to the X-22A Demonstrator, although they were intended for production contracts. What's amazing is that as successful as the X-22A was, it didn't reach production.
 
Sundog said:
What's amazing is that as successful as the X-22A was, it didn't reach production.
Click to expand...
This becomes less amazing when one considers that the X-22 was planned from the beginning as a pure research vehicle. At best, it would have been followed by a new ducted-fan design for an operational aircraft, but the X-22A itself was not primarily designed as such. Of course, this didn't stop Bell from proposing a whole lot of operational X-22 derivatives (who wouldn't ;) ) , but it was effectively clear from the beginning that the X-22A itself was only a research plane.
 
Hi Andreas,
I understand all of that, I just mean when you look at everything the military, government, and aerospace companies went through to get viable VTOL transport technology the X-22A was around a long time before the V-22 and it just seems to me they could have had it twenty years earlier using X-22A technology. Of course, they would have had to correct the landing gear problem for production ;)
 
Thanks my dears,

also there were anther projects,but I don't know they were
related to D-190 or not;D-174,D-179,D-181 and D-182A/C.
 
Of course, this didn't stop Bell from proposing a whole lot of operational X-22 derivatives
Click to expand...

Such as this:

BellX-22A-1.jpg


Regards,

Greg
 
I am hoping that someone can assist with finding information on flight operations and characteristics reports of the Bell X-22A four post ducted fan VTOL aircraft. I am surprised that as one of the longest flying experimental VTOL aircraft, I have been unable to find many reports on the operational characteristics of the aircraft. More accurately I have been unable to find information that does not require me to pay for a copy of the report, which frankly I would rather not do if possible.

If anyone has any ideas I would be very grateful for the assistance.
 
http://www.amazon.com/X-Planes-X-1-X-45-3rd/dp/1857801091/ref=pd_bbs_sr_1/104-9864165-4711963?ie=UTF8&s=books&qid=1180891898&sr=1-1

that's X-series Bible. You'll find X-22 comprehensive info here
 
I thought there may have been something at the NASA Technical Reports Server ( http://ntrs.nasa.gov/search.jsp ).

I did find this: AERODYNAMIC CHARACTERISTICS OF FOUR-DUCT TANDEM VTOL-AIRCRAFT CONFIGURATIONS (at http://hdl.handle.net/2060/19630001970 ), and this:
Transition characteristics of a vtol aircraft powered by four ducted tandem propellors (http://hdl.handle.net/2060/19640007836).

There may be more; it's probably one of the best places to look.

As a (boring?) aside, I actually used to work with somebody who had been an engineer on this project. Interestingly, the Bell that built the X-22 is not quite the same Bell as the one that builds the V-22.
 
Thanks Gents,

I keep my copy of X-Planes on the bookshelf right next to me. That has been the sole source of of information on the topic to date. I have been to the NASA Tech Report Server, but most of the reports have a price tag, unfortunately.

The two NASA documents though do have some great information. Thanks snurg!

The hunt continues!
 
Model of Bell X-22A manufactured by Topping found on eBay.

URL: http://cgi.ebay.com/Topping-Bell-X-22A-Airplane-Manufacturers-Plane-Model_W0QQitemZ170529435762QQcategoryZ86954QQcmdZViewItemQQ_trksidZp4340.m8QQ_trkparmsZalgo%3DMW%26its%3DC%26itu%3DUCC%26otn%3D5%26ps%3D63%26clkid%3D6102614725634814373

Description:
Original late 1950s vintage Topping model of the X-22A VSTOL aircraft.

Excellent/collector quality condition.

The model is made out of plastic. The stand is made from metal.

The nacelles pivot from forward to vertical.

The model measures 10 inches in length and 10 inches in wingspan.
Click to expand...
 

Attachments

  • ModTopA008.JPG
    ModTopA008.JPG
    73.1 KB · Views: 78
  • ModTopA010.JPG
    ModTopA010.JPG
    148.4 KB · Views: 54
  • ModTopA006.JPG
    ModTopA006.JPG
    156.1 KB · Views: 52
  • ModTopA005.JPG
    ModTopA005.JPG
    151.4 KB · Views: 50
  • ModTopA004.JPG
    ModTopA004.JPG
    147.5 KB · Views: 52
  • ModTopA003.JPG
    ModTopA003.JPG
    164.5 KB · Views: 55
  • ModTopA002.JPG
    ModTopA002.JPG
    157.4 KB · Views: 559
  • ModTopA001.JPG
    ModTopA001.JPG
    157.7 KB · Views: 605
Dear Boys and Girls, here is an article in French about the Bell X-22A prototype. The article compared the design of this prototype to that of the SNCAN Nord 500 Helcade qv......

http://www.secretprojects.co.uk/forum/index.php/topic,2089.msg121319.html#msg121319

The article comes from the 15th June 1965 issue of Aviation Magazine International......

Terry (Caravellarella)
 

Attachments

  • Bell X-22A VTOL prototype - Aviation Magazine International - Numéro 421 - 15 Juin 1965......jpg
    Bell X-22A VTOL prototype - Aviation Magazine International - Numéro 421 - 15 Juin 1965......jpg
    105.4 KB · Views: 231
One of my favorite programs EVER! Thanks for sharing.

No offense intended to our Belgian forumites, but the title "Aerospace Belgium" on the cover sounds a bit of a Belgian joke to my ears... ;D
 
Stargazer2006 said:
One of my favorite programs EVER! Thanks for sharing.

No offense intended to our Belgian forumites, but the title "Aerospace Belgium" on the cover sounds a bit of a Belgian joke to my ears... ;D
Click to expand...

I know :eek: ; the issue has a BIG feature on the Belgian aircraft industry inside......
 
Stargazer2006 said:
One of my favorite programs EVER! Thanks for sharing.
Click to expand...

Dear Stéphane, here is an artist's impression with details in French of the Bell X-22A (when it was still at the "project" stage) showing a rather neater-looking design (planned production version?) than the one actually flown......

The picture comes from the 15th June 1963 issue of Aviation Magazine......

Terry (Caravellarella)
 

Attachments

  • Bell X-22A VTOL project - Aviation Magazine - Numéro 373 - 15 Juin 1963......jpg
    Bell X-22A VTOL project - Aviation Magazine - Numéro 373 - 15 Juin 1963......jpg
    100.3 KB · Views: 393
Thanks Terry! You've gotta LOVE that fully-glazed cockpit!!! What an amazing design through and through.
 
Stargazer2006 said:
Thanks Terry! You've gotta LOVE that fully-glazed cockpit!!! What an amazing design through and through.
Click to expand...

Prefer the SNCAN Nord 500 Helcade myself Stéphane. Maybe we should call this one the "Bellcade" ;D

Terry (Caravellarella)
 
Caravellarella said:
Prefer the SNCAN Nord 500 Helcade myself Stéphane. Maybe we should call this one the "Bellcade" ;D
Click to expand...

Unless you're asking for an estocade... ;D ;D
 
Stargazer2006 said:
Caravellarella said:
Prefer the SNCAN Nord 500 Helcade myself Stéphane. Maybe we should call this one the "Bellcade" ;D
Click to expand...

Unless you're asking for an estocade... ;D ;D
Click to expand...

Might just set off along the "Rocade" ;D ;D ;D
 
Caravellarella said:
Stargazer2006 said:
Caravellarella said:
Prefer the SNCAN Nord 500 Helcade myself Stéphane. Maybe we should call this one the "Bellcade" ;D
Click to expand...

Unless you're asking for an estocade... ;D ;D
Click to expand...

Might just set off along the "Rocade" ;D ;D ;D
Click to expand...

Hmm... I can tell this love you have for French aviation is more than a mere tocade... ;D ;D ;D ;D
 
Stargazer2006 said:
Caravellarella said:
Stargazer2006 said:
Caravellarella said:
Prefer the SNCAN Nord 500 Helcade myself Stéphane. Maybe we should call this one the "Bellcade" ;D
Click to expand...

Unless you're asking for an estocade... ;D ;D
Click to expand...

Might just set off along the "Rocade" ;D ;D ;D
Click to expand...

Hmm... I can tell this love you have for French aviation is more than a mere tocade... ;D ;D ;D ;D
Click to expand...

Cos I'm a tocard ;D ;D ;D ;D
 
You're having WAY too much fun, les francophones ;)
 
Hence the vague "Francophone" and not "Francais"!!! :) Not that it matters, but would Lebanese have been closer? i'm asking because of the flag on your avatar.

Regards,
Francesco
 
Dear Boys and Girls, here is a picture with a caption in French about the Bell X-22A prototype; stating that neither the Bell X-22A nor the (then) competing Ling-Temco-Vought XC-142A had received a production order to date......

The article comes from the 15th May 1969 issue of Aviation Magazine International......

Terry (Caravellarella)
 

Attachments

  • Bell X-22A VTOL prototype - Aviation Magazine International - No. 514 - 15 Mai 1969.......jpg
    Bell X-22A VTOL prototype - Aviation Magazine International - No. 514 - 15 Mai 1969.......jpg
    88.1 KB · Views: 333
Hi,


is there any good 3-view to those Bell X-22 variants,or early concepts ?.
 
Here are the X-22-related designs that I know of:
  • D2005 assault transport for USMC, forerunner design of X-22 (summer 1959)D-2020 smaller corporative D-2022 derivative
  • D2021A smaller corporative D-2022 derivativeD-2021B development of D-2001 two-seater tilt-rotor
  • D2022 USMC VTOL Assault Transport System Requirement/US Army ASR 3-60 VTOL Transport System Study (formal proposal derivated from D-2005, 1960)
  • D2064 military VTOL transport development of D-2022; joint design with Lockheed to meet TS-152 for a tri-service STOL
  • D2064A improved version
  • D2127 (became the X-22A)
  • D2172 enlarged development of X-22
  • D2239 ducted fan large transport aircraft
  • D2240 ducted fan very large transport aircraft (also known as Model 2240)
  • D2249 ducted fan medium aircraft
  • D2250 ducted fan military aircraft
  • D2251 ducted fan medium size military aircraft (3 configurations)
  • D2332 armed X-22A proposal
  • D2410 USAF Tactical Air Command VTOL aircraft
  • D2424 X-22A test project (Naval Air Systems Command)
Unfortunately I don't have pictures for each of these. Check the D2022 and D2064 topic for images of these projects.
 

Attachments

  • image119.jpg
    image119.jpg
    200.5 KB · Views: 355
  • image108.jpg
    image108.jpg
    117 KB · Views: 339
There was also a fake photo representing the second X-22A prototype with a stretched cockpit as the "X-22A-1":
 

Attachments

  • BellX-22A-1.jpg
    BellX-22A-1.jpg
    139.7 KB · Views: 709
From the September '64 issue of Army Aviation Digest:
 

Attachments

  • x-22.png
    x-22.png
    728.9 KB · Views: 684
If the cutaway is from Flight, you might be able to find a (possibly-not much) better copy on the Flight archives (flightglobal.com)
 
These are some photos which i found on net, As the Name States These photos are related to the Ground Support version of the X-22 ("AX-22"). :O)
http://up-ship.com/blog/?cat=13&paged=26
 

Attachments

  • AX-22-3.jpg
    AX-22-3.jpg
    128.4 KB · Views: 255
AX-22-2
http://up-ship.com/blog/?cat=13&paged=26

Another piece depicting a ground attack variant of the X-22. This time the changes are more involved, including a wholly new tandem cockpit. The turret is gone, but the trainable side guns remain. A substantial load of iron bombs is depicted.
 

Attachments

  • AX-22-2.jpg
    AX-22-2.jpg
    121.6 KB · Views: 523
AX-22-3
http://up-ship.com/blog/?cat=13&paged=26


Final piece of Bell artwork depicting a ground attack variant of the X-22. Similar in most respects to the previously shown design, it does feature a different weapons load… instead of bombs, it has a deployable pack of folding-fin rockets.

***Related to the 2nd Picture
A piece of artwork from the Bell archives showing a minimally-modified X-22 as a ground attack vehicle. The X-22 was surprisingly small, and if armed probably would have been capable of carrying much the same ordnance as the AH-1 Cobra.
It’s shown here with two trainable gun pods, an offset underside turret (looking not unlike the turret used on early Cobras) and a single deployable rocket pod.
 

Attachments

  • AX-22-3.jpg
    AX-22-3.jpg
    128.4 KB · Views: 222
  • AX-22-1.jpg
    AX-22-1.jpg
    126 KB · Views: 249
OBB's ears must be ringing... :)
At least Scott has the satisfaction of knowing people are reading his blog.
 
Good Morning to All,


Although an interesting and "cool" aircraft design, the X-22 was only a Bell R&D project and never went into production because the design was inherently dangerous. The aircraft was completely dependent on the ducted fans for lift. Where an airplane can glide, and a helicopter can auto-rotate in a power-failure emergency, the X-22 would simply fall out of the sky and kill everyone on board. The ducted fans could not auto-rotate. The pilot had no "Plan B".


Cheers from Texas
 

Similar threads

Please donate to support the forum.

Back
Top Bottom