BAE Systems - Future Concepts: YouTube videos for Farnborough 2014

fightingirish

ACCESS: Top Secret
Senior Member
Joined
3 June 2006
Messages
2,964
Reaction score
3,235
Future Concepts - The Survivor
Scientists and engineers at BAE Systems have lifted the lid on some futuristic technologies that could be incorporated in military and civil aircraft of 2040 or even earlier.
This technology allows jets to quickly heal themselves from damage sustained in flight.
The technology is a lightweight adhesive fluid inside a pattern of carbon nanotubes from which the aircraft is constructed and is released when damaged to quickly 'set' mid-flight and heal any damage.
This advanced use of materials would create a highly survivable jet, capable of entering even the most dangerous of scenarios to complete vital missions.
http://youtu.be/LdHC7IuoATg
Code:
http://youtu.be/LdHC7IuoATg


Future Concepts - Directed Energy Systems
Scientists and engineers at BAE Systems have lifted the lid on some futuristic technologies that could be incorporated in military and civil aircraft of 2040 or even earlier.
A futuristic attachment weapon for aircraft that is capable of firing a concentrated beam of energy at the speed of light.
Currently in use on battlefields today are Directed Energy Systems which can be used to protect ground troops from incoming projectiles such as missiles or mortars via concentrated energy beams.
In future, these could be adapted into an attachment for aircraft, taking that capability to the air, allowing fast-moving jets to destroy targets mid-air with incredible accuracy, at a low cost per beam, and with a very deep magazine which holds beams.
http://youtu.be/aGKubjitlcI
Code:
http://youtu.be/aGKubjitlcI


Future Concepts - On-board 3D Printing

Scientists and engineers at BAE Systems have lifted the lid on some futuristic technologies that could be incorporated in military and civil aircraft of 2040 or even earlier. Smaller unmanned aircraft -- or UAVs -- are created by super high-tech on-board 3D printers, via Additive Layer Manufacturing and robotic assembly techniques. The 3D printers respond to data fed to them by a remote control room where a human commander decides what should be produced. The UAVs are best suited to each scenario -- be it a group of wide-winged aircraft for protracted or enduring surveillance -- or rotary-winged UAVs to rescue single civilians or soldiers from dangerous situations. After use the UAVs could render themselves useless through dissolving circuit boards or they might safely land in a recoverable position if re-use was required. This creates the ultimate adaptable taskforce, with a lead aircraft able to enter any unknown scenario and quickly manufacture an effective toolset for any task.
http://youtu.be/ulhnfdtZuW4
Code:
http://youtu.be/ulhnfdtZuW4

Future Concepts - The Transformer
Scientists and engineers at BAE Systems have lifted the lid on some futuristic technologies that could be incorporated in military and civil aircraft of 2040 or even earlier.
The Transformer is a flexible aircraft system that combines smaller jets for more efficient travel, before having them split apart to quickly adapt to any scenario.
The concept can be tailor-made to suit any scenario. For longer journeys, smaller sub-aircraft can be combined together during travel, to increase the range of the jet and save fuel through reducing 'drag'.
Once they have reached their objective however, the craft can then split off and adapt to any given situation -- whether that is going on the offensive if threatened, or performing functional tasks such as surveillance or the dropping of supplies.
http://youtu.be/Re29lqCEtpc
Code:
http://youtu.be/Re29lqCEtpc


At first thought, the Transformer UAV system reminds me very much of a "Starcom Shadow Bat" toy. Myself as a kid wanted it but never got it. :mad: ;) :)
 
3D printing an entire airframe within another airframe? Well I guess it should be plausible in 30 years?
 
Really interesting videos. I often wonder what the world of military aviation will look like in 30-40 years time.
 
Looks like sombody is interested in using the bird of prey plan form.
 
Hmmm.... getting the three platforms to join back up again would be an interesting challenge for the aerodynamiscists and control theory chaps / chappesses. Well, I say "interesting challenge" - I mean; nightmare...
 
About Transformer: Multi-Vector Assault Mode, anyone? :p

http://www.youtube.com/watch?v=07eyG5l7dVE
 
Also;


http://www.phantomreport.com/the-future-of-warfare-self-healing-aircraft-and-transformer-plane
 

Attachments

  • BAE-systems-tranformer.jpg
    BAE-systems-tranformer.jpg
    62.6 KB · Views: 314
shedofdread said:
Hmmm.... getting the three platforms to join back up again would be an interesting challenge for the aerodynamiscists and control theory chaps / chappesses. Well, I say "interesting challenge" - I mean; nightmare...
idea traces back as early as 80s and then it was considered by NASA in much more advanced form (dozens if not hundreds flying transport bots united in swarm flying wing)
 
That 3D printing concept, I just cannot wrap my head around that. Doesn't it take hours to make even relatively basic objects? How could you do something with so many internal components of many different materials?
 
just thirty years ago, your smartphone would be considered a miracle...BAE concept is thirty years in future
 
The above BAE Systems videos merged and added to, into one clip with a different soundtrack: http://www.telegraph.co.uk/finance/financevideo/10973022/Concept-air-force-jets-straight-out-of-science-fiction.html
 

Similar threads

Please donate to support the forum.

Back
Top Bottom